Stenner's Econ

FP Series

The Econ FP is activated by flow and offers three control capabilities to choose from all in one pump.

The Econ FP is perfect for light-duty applications such as drinking water disinfection or pH adjustment for private water wells in homes or farms. In the animal health market such as poultry hatcheries, the FP can inject nutrients or supplements into the drinking water or disinfect the water lines with the injection of acids, chlorine or chlorine dioxide.

This flow activated pump can accept a dry contact signal or a 12-24 VAC/VDC signal from any control equipment that responds to flow. The functions are easy to program on the six button control pad with a backlit LCD window. The pump features an enclosed housing, is wall mountable and carries cULus for indoor and outdoor use. The pump is equipped with a wall adapter power supply. Mounting the pump vertically is required for wet environments or outdoor use. Optional mounting accessories are also available.

How It Works

The pump runs at a set time or a set speed according to the mode of operation selected. The control panel displays one of three operating modes, Seconds, Flow Switch and Auxiliary and the percent setting for each. To assist against tampering, two buttons are required for operation and the keypad will automatically lock if it remains idle for one minute. Click here for programming videos.

SECONDS (dry contact signal)  View programming video

In the Seconds mode, the pump can receive a dry (non-voltage) contact signal and will run for a set time in response to receiving the signal. The pump can receive the signal from, for example, a water meter or control valve that sends a dry contact signal.   There is a choice of five pump operating time ranges and the maximum time is displayed in the control panel; the run time is adjustable from 10% to 100% in 1% increments.